Koporo ka sebopeho sa eona se hloekileng ha e na matla a lekaneng joalo ka litšepe tse ling tsa alloy.Ka hona, Copper Nickel Alloy Pipes e kenyelletsa lintho tse kang tšepe le manganese bakeng sa matla a eketsehileng.Ho na le lihlopha tse fapaneng tsa khatello ea koporo tse sebelisoang ho balloa tlhokahalo ea kereiti e nepahetseng.Kemiso ea 40 Copper Nickel Pipes e ka mamella likhatello tse bonolo athe Schedule 80 Copper Nickel Pipes e ka mamella maemo a khatello e phahameng.
Thepa ea 'Mele ea Copper Nickel Condenser Tubes
| Thepa ea phala ea koporo ea nickel | Metric ka °C | Moemphera ka °F |
| Melting Point | 11,500°C | 21,000°F |
| Melting Point | 11,000°C | 20,100°F |
| Botenya | 8.94 gm/cm³ @ 20°C | 0.323 lb/in³ @ 68°F |
| Matla a Khoheli a khethehileng | 8.94 | 8.94 |
| Coefficient ea Katoloso ea Thermal | 17.1 x 10 -6 / °C (20-300°C) | 9.5 x 10 -5 / °F (68-392°F) |
| Themal conductivity | 40 W/m.°K @20°C | 23 BTU/ft³/ft/hr/°F @ 68°F |
| Matla a Thermal | 380 J/kg.°K @20°C | 0.09 BTU/lb/°F @ 68°F |
| Motlakase Conductivity | 5.26 microhm?¹.cm?¹ @ 20°C | 9.1% ea IACS |
| Ho hanyetsa Motlakase | 0.190 microhm.cm @ 20°C | 130 ohms (circ mil/ft) @ 68°F |
| Modulus ea Elasticity | 140 GPA @ 20°C | 20 x 10 6 psi @ 68°F |
| Modulus of Rigidity | 52 GPA @ 20°C | 7.5 x 10 6 psi @ 68°F |
Chate ea Copper Nickel Alloy Pipe Chemical Composition Chart
| Kereiti | Cu | Mn | Pb | Ni | Fe | Zn |
| Cu-Ni 90-10 | 88.6 mets | 1.00 max | 0.5 boholo | 9-11 max | 1.8 max | 1.00 max |
| Cu-Ni 70-30 | 65.0 mets | 1.00 max | 0.5 boholo | 29-33 max | 0.4-1.0 | 1.00 max |
Tlhahlobo ea Mechini ea ASTM B466 Copper Nickel Tube
Ho fumana baetsi ba molemo ka ho fetisisa ba ASTM B466 Cunifer Pipe bakeng sa ts'ebeliso ea bohlokoa?Joale u se ke ua sheba hole!Morekisi le morekisi ea ka sehloohong oa Cunifer Pipe naheng ea India
| Element | Botenya | Melting Point | Matla a tšepe | Matla a Hlahisa (0.2%Offset) | Elongation |
| Cupro Nickel 90-10 | 0.323 lb/in3 ho 68 F | 2260 F | 50000 psi | 90-1000 psi | 30% |
| Cupro Nickel 70-30 | 0.323 lb/in3 ho 68 F | 2260 F | 50000 psi | 90-1000 psi | 30% |
Jiangsu Hangdong Metal Co., Ltd. ke khoebo ea ho lahla le ho sebetsana le theknoloji e hlahisang koporo e hloekileng, koporo, boronse le koporo-nickel alloy copper-aluminium plate le coil, e nang le lisebelisoa tse tsoetseng pele tsa tlhahiso le lisebelisoa tsa tlhahlobo.E na le mela e 5 ea tlhahiso ea aluminium le mela e 4 ea tlhahiso ea koporo ho hlahisa mefuta eohle ea poleiti e tloaelehileng ea koporo, tube ea koporo, bar ea koporo, khoele ea koporo, tube ea koporo, poleiti ea aluminium le coil, le tloaelo e sa tloaelehang.Khampani e fana ka lithane tse limilione tse 10 tsa thepa ea koporo selemo ho pota.Maemo a mantlha a sehlahisoa ke: GB/T, GJB, ASTM, JIS le maemo a Sejeremane. Iteanye le rona:info6@zt-steel.cn
Nako ea poso: Dec-29-2023
